HK style roller chains

Downsizing Your System with Greater Electrical power Chains
HK variety roller chains conform to H style of ANSI, and their thickness of inner and outer link plates are equal to those on the following bigger dimension chain. Thus, HK style roller chains are larger in tensile strength by about 20%and in highest allowable load by about 15% than individuals of normal roller chains. Because the weight of the chains can also be more substantial, HK type roller chains are suitable for your application of heavy duty at minimal pace.
Proposed uses
?Optimal for spots exactly where greater power is required but huge and heavier chains are not able to be utilised.
Choice of chains
Pick a proper HK type roller chain determined by “Low-speed selection”
For that greatest allowable load, see the next table of dimensions.
HK style roller chains can be found as much as triplex.
Sprockets
Use regular sprockets for any simplex HK roller chain Since the transverse pitches are greater than these of typical chains inside the situation of duplex or triplex, common sprockets are not able to be made use of. Refer to your sprocket tooth profiles for HK
Connecting link and offset hyperlink
The tensile power of connecting back links and offset back links are listed on the left, but the optimum allowable load is decrease than that of your base chain. Please seek advice from us really should you have any concerns. It is advisable to utilize the connecting hyperlink of interference-fitted (FJ, HJ)
Never ever make the holes on the connecting plate bigger and in no way make the pins thinner to facilitate the operate for fitting the pins to the connecting plate, given that otherwise the fatigue strength might be lowered.
Collection of chains
Pick a appropriate HK style roller chain depending on “Low-speed selection”
For the maximum allowable load, see the next table of dimensions.
HK sort roller chains can be found as much as triplex.
Sprockets
Use normal sprockets for any simplex HK roller chain Because the transverse pitches are greater than individuals of normal chains inside the situation of duplex or triplex, standard sprockets can’t be made use of. Refer towards the sprocket tooth profiles for HK
Connecting website link and offset link
The tensile power of connecting back links and offset backlinks are listed about the left, but the greatest allowable load is decrease than that from the base chain. Please talk to us should you’ve any questions. It really is encouraged to work with the connecting link of interference-fitted (FJ, HJ)
Never make the holes from the connecting plate more substantial and in no way make the pins thinner to facilitate the do the job for fitting the pins into the connecting plate, considering the fact that otherwise the fatigue strength will likely be lowered.