Warranty: 3years
Design Amount: 180DMK-M16030-72V
Usage: BOAT, Car, Electric powered Bicycle, Admirer, Residence Equipment, Other
Sort: Gear MOTOR, Brushless Motor
Torque: 16N.M, 1.6NM
Development: Long term Magnet, Permanent Magnet
Commutation: Brushless, Brushless
Safeguard Attribute: Drip-evidence, Absolutely Enclosed
Speed(RPM): 3000 rpm, 3000RPM
Steady Current(A): 82A, 82A
Effectiveness: Ie three
Route of Rotation: CW/CCW
Rotor inertia(Kgcm2): fifty five
Voltage(V): 48V,72V,96V
Packaging Specifics: According to the measurement of the motor for risk-free packing.
Port: HangZhou
Kindly remind: As distinct buyers might want distinct motor parameter for fitting your tools. If underneath motor can not match your need, you should kindly send out inquiry to us with data for rated power or torque,rated speed, and rated voltage for our new dimension drawing creating for you. Thanks a lot!Proportions (Device: mm )Mounting screws are included with gearhead Customizable equipment:motor length, shaft, voltage,energy,rated speed and so on.Characteristic: A. High power range from 50W to 20KW B. Rich stock and quickly shipping and delivery time in ten operating times C. Effortless for pace & path adjustmentD. 16mm to 220mm size range with minimal noisy E. Sturdy security for driver/controllerF. Life time previously mentioned ongoing 10000 hoursG. IP65 safety rank is obtainable for us H. Earlier mentioned 90% enery efficiency motor is obtainable I. 3D file is offered if buyers neededJ. Permanent magnet brushless dc motor K.High-functionality and steady matching driver and controllerNotice for Utilization: 1).Remember to will not use motor out of the assortment of nameplate of equipment box and motor and the specification of productcatalogue, avoiding acquiring an electrical shock, hurting or harming the unit. 2).Please do not set your fingers and issues intothe opening portion of equipment or motor ,in get to avert getting and electric shock,hurting,catching a fire of detrimental unit etc.3).Remember to do not use the Hurt gear head of motor, in prder to orevent hurting,catching a hearth and so on. 4).Remember to do not place off thenameolate. 5) If the goods are reformed by the buyers individually, it no more time belongs to the ensure scope, and ourcompany does not undertake any accountability. 6) When you go it, if it shed off or tilt to 1 aspect, it is quite hazardous,remember to pay out a lot more interest. 7) Make sure you have to not set the flammable point close to the gear head and motor, in buy to avoid catching afire.More depth.welcome to go to our site at http:///18059/ FLIER TECH is a specialist company was launched in 2009 in HangZhou,who boats 12 many years of encounter in the motor and controller business. Our principal products are Brushless DC Motor, Brushless Controller, DC Servo Motor and Controller, Planetary Gear Motors, Worm Equipment Motors, Brush DC Motor and AC Motor,BMS… They are extensively utilized in AGV, RGV, Robots, Lifting Equipment, Cleansing Mmachines, Medical Gear, Cafe Equipment, Packing Equipment, Amusement Match Devices, Automobiles, Industrial Gear Etc. With a plant location of 4000 square meters, we have the unbiased layout and growth abilities and strong technical power, with an yearly output of far more than 1 million units. OEM/DM orders are welcome, FLIER motors experienced exported to twenty international locations till now, which includes the US, Germany, Italy, United kingdom, Poland, Australia ,Saudi Abrabia, Switzerland, Sweden Japan and so on. We are searching forward to creating a prolonged-expression welcoming organization romantic relationship with you. Q1: What variety motors you can supply?A1: For now, we mainly give permanent magnet brushless dc motor, dc equipment motor, micro dc motor, planetary gear motor, dc servomotor, brush dc motors, with diameter assortment from sixteen to 220mm,and power variety from 5W to 20KW.Q2: Is there a MOQ for your motors?A2: No. we can take 1 pcs for sample producing for your tests,and the price tag for sample creating will have ten% to 30% differencethan bulk value based mostly on different fashion.Q3: Could you deliver me a price tag listing?A3: For all of our motors, they are tailored primarily based on different requirements like electrical power, voltage, gear ratio, rated torque andshaft diameter and so on. The cost also may differ according to diverse buy qty. So it is difficult for us to supply a price checklist. Ifyou can share your comprehensive specification and purchase qty, we’ll see what supply we can supply.This autumn: Are you motors reversible?A4: Sure, nearly all dc and ac motor are reversible. We have technological folks who can educate how to get the operate by differentwire link.Q5: Is it attainable for you to create new motors if we give the tooling value?A5: Sure. Remember to kindly share the in depth needs like functionality, dimension, yearly amount, goal cost and so on. Then we’ll makeour evaluation to see if we can prepare or not.Q6:How about your shipping and delivery time?A6: For micro brush dc equipment motor, the sample supply time is 2-5 days, bulk shipping time is about 15-20 days, is dependent on theorder qty. For brushless dc motor, the sample deliver time is about 10-15 days bulk time is 15-20 times.Make sure you consider the salesconfirmation for ultimate reference.Q7:What is your warranty phrases?A6: One calendar year
Is a worm gear reducer right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer is right for your application, you’ve come to the right place. This gear reducer is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer
Worm reducer is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducers require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducers produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducers, so they can be used in tight spaces and applications where space is limited.
Worm gear reducers are an excellent choice for applications requiring high torque and low speeds. These reducers are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducers are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducers are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducers are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducers have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer is typically much hotter than a hypoid reducer, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducers are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducers have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer can produce the same amount of output as a 1/2 HP hypoid reducer. A Nissei Corporation study compared the two types of reducers, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer.
The efficiency of a worm gear reducer depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer also have an impact on its efficiency. As a result, worm gear reducers should be used with the right type of lubricant.
In a worm gear reducer, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer is also quiet and has a low friction coefficient.
It has a low clearance
Worm Reducers are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer is a versatile gear train that provides a high torque-to-weight ratio. These reducers are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducers are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducers, worm gear reducers are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducers are one of the most popular types of reducers. It provides high torque and high speed ratio in a compact package. These reducers are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducers come in a variety of shapes and sizes, including parallel shaft reducers and planetary worm reducers. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by czh