Select Page

China High Performance Gearbox RV Series Worm Gear Motor Gearbox Made in China helical worm gearbox

Item Description

Large Functionality Gearbox RV Series Worm Gear Motor gearbox Created in China

RV 571-150 worm gear box with flange and electrical motor
RV+NRV Double Stage Arrangement Reduction Equipment Box
RV Sequence Worm Gearbox
worm speed reducer
rv worm gear motor

RV Sequence
Like RV / RV / NRV.
Main Characteristic of RV Sequence Worm Gearbox
RV sequence worm equipment reducer is a new-era solution developed by CZPT on the foundation of perfecting WJ collection products with a compromise of superior engineering each at house and overseas.
one. High-top quality aluminum alloy, gentle in weight and non-rusting.
two. Big in output torque.
three. Clean managing and minimal noise,tough in dreadful circumstances.
4. High radiation efficiency.
five. Excellent-hunting visual appeal, durable in service existence and little volume.
six. Appropriate for omnibearing set up.
Main Components of RV Series Worm Gearbox
one. Housing: die-solid aluminum alloy(body dimensions: 571 to 090), solid iron(body size: a hundred and ten to a hundred and fifty).
two. Worm: 20Crm, carbonization quencher warmth treatment method makes the floor hardness of worm gears up to 56-62 HRX, retain carbonization layer’s thickness among .3 and .5mm right after specific grinding.
3. Worm Wheel: wearable stannum bronze alloy.

SPEED RATIO 7.5~a hundred
OUTPUT TORQUE <1050NM
IN POWER .09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

 

When working, excellent load capability, secure working, minimal sound with  substantial effectiveness.
  Gear Box’s Use Subject
1 Metallurgy       11 Agitator  
2 Mine       12 Rotary weeder  
3 Machine       13 Metallurgy   
4 Vitality       fourteen Compressor
5 Transmission     fifteen Petroleum business
six Water Conserbancy     16 Air Compressor
seven Tomacco       seventeen Crusher  
eight Health care       18 Materials
9 Packing     19 Electronics  
ten Chemical business     twenty Textile indutry
           
Power .06kw .09kw .12kw .18kw .25kw .37kw .55kw
.75kw 1.1kw one.5kw 2.2kw 3kw 4kw 5.5kw
7.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  far more
Color Blue, Silver or as customers’ want
Material Iron or Aluminium
Packing Carton with Plywood  Situation or as clients’ requirement
Variety RV571 RV030 RV040 RV050 RV063 RV075 RV090
Excess weight .7kg 1.3kg two.3kg three.5kg 6.2kg 9kg 13kg
Variety RV110 RV130 RV150        
Fat 35kg 60kg 84kg        
Mounting Approaches Foot Set up   Flange Installation
For various  mortor or double input/output shafts can be outfitted

Item photograph:

Framework:

Certificate:

Packing & Shipping and delivery:

Our business :
AOKMAN was launched in 1982, which has more than 36 a long time in R & D and producing of gearboxes, gears, shaft, motor and spare components.
We can offer the appropriate resolution for uncountable applications. Our products are commonly utilized in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of devices with a strong presence in the worldwide marketplace.
AOKMAN has turn out to be a reliable supplier, CZPT to provide higher high quality gearboxes.With 36 a long time experience, we assure you the utmost reliability and stability for each item and companies.

Buyer browsing:

FAQ:
1.Q:What types of gearbox can you generate for us?
A:Major items of our business: UDL sequence speed variator,RV sequence worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P sequence planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred versions and 1000’s of technical specs
2.Q:Can you make as for each custom drawing?
A: Yes, we offer you personalized services for consumers.
three.Q:What is your conditions of payment ?
A: 30% Progress payment by T/T soon after signing the deal.70% just before shipping
four.Q:What is your MOQ?
A: 1 Set
Make contact with:

Welcome you contace me if you are intrigued in our item.
Our group will help any require you may well have.

US $30-150
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industry
Function: Speed Changing, Speed Reduction
Layout: Worm
Hardness: Hardened
Installation: Horizontal Type
Step: Single-Step

###

Customization:

###

SPEED RATIO 7.5~100
OUTPUT TORQUE <1050NM
IN POWER 0.09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

###

When working, great load capacity, stable running, low noise with  high efficiency.
  Gear Box’s Usage Field
1 Metallurgy       11 Agitator  
2 Mine       12 Rotary weeder  
3 Machine       13 Metallurgy   
4 Energy       14 Compressor
5 Transmission     15 Petroleum industry
6 Water Conserbancy     16 Air Compressor
7 Tomacco       17 Crusher  
8 Medical       18 Materials
9 Packing     19 Electronics  
10 Chemical industry     20 Textile indutry
           
Power 0.06kw 0.09kw 0.12kw 0.18kw 0.25kw 0.37kw 0.55kw
0.75kw 1.1kw 1.5kw 2.2kw 3kw 4kw 5.5kw
7.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  more
Color Blue, Silver or as customers’ need
Material Iron or Aluminium
Packing Carton with Plywood  Case or as clients’ requirement
Type RV025 RV030 RV040 RV050 RV063 RV075 RV090
Weight 0.7kg 1.3kg 2.3kg 3.5kg 6.2kg 9kg 13kg
Type RV110 RV130 RV150        
Weight 35kg 60kg 84kg        
Mounting Methods Foot Installation   Flange Installation
For various  mortor or double input/output shafts can be equipped
US $30-150
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industry
Function: Speed Changing, Speed Reduction
Layout: Worm
Hardness: Hardened
Installation: Horizontal Type
Step: Single-Step

###

Customization:

###

SPEED RATIO 7.5~100
OUTPUT TORQUE <1050NM
IN POWER 0.09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

###

When working, great load capacity, stable running, low noise with  high efficiency.
  Gear Box’s Usage Field
1 Metallurgy       11 Agitator  
2 Mine       12 Rotary weeder  
3 Machine       13 Metallurgy   
4 Energy       14 Compressor
5 Transmission     15 Petroleum industry
6 Water Conserbancy     16 Air Compressor
7 Tomacco       17 Crusher  
8 Medical       18 Materials
9 Packing     19 Electronics  
10 Chemical industry     20 Textile indutry
           
Power 0.06kw 0.09kw 0.12kw 0.18kw 0.25kw 0.37kw 0.55kw
0.75kw 1.1kw 1.5kw 2.2kw 3kw 4kw 5.5kw
7.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  more
Color Blue, Silver or as customers’ need
Material Iron or Aluminium
Packing Carton with Plywood  Case or as clients’ requirement
Type RV025 RV030 RV040 RV050 RV063 RV075 RV090
Weight 0.7kg 1.3kg 2.3kg 3.5kg 6.2kg 9kg 13kg
Type RV110 RV130 RV150        
Weight 35kg 60kg 84kg        
Mounting Methods Foot Installation   Flange Installation
For various  mortor or double input/output shafts can be equipped

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
worm reducer

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China High Performance Gearbox RV Series Worm Gear Motor Gearbox Made in China     helical worm gearboxChina High Performance Gearbox RV Series Worm Gear Motor Gearbox Made in China     helical worm gearbox
editor by czh 2023-01-04

worm gear box

As one of leading worm gear boxes manufacturers, suppliers and exporters of products, We offer sworm gear box and many other products.

Please contact us for details.

Mail:sales@gear-box-worm.net

Manufacturer supplier exporter of worm gear box

Recent Posts